implementing load balancing through IS-IS: Networking Requirements As shown in Figure 1: CX- A, CX- B, CX- C, and CX- D run IS-IS to implement interconnection in the IP network. CX- A, CX- B, CX- C, and CX- D are Level-2 routers in area 10. Load balancing is required to transmit the traffic of CX- A to CX- D through CX- B and CX- C. Figure 1 Networking diagram of configuring IS-IS load balancing Device Interface IP Address Device …
The post Configuring IS-IS Load Balancing appeared first on Network Solution.
]]>