MPLS TE Archives - Network Solution https://blog.network-solution.net/tag/mpls-te/ Wed, 12 Aug 2015 21:42:29 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.7 https://blog.network-solution.net/wp-content/uploads/2021/06/favicon.ico MPLS TE Archives - Network Solution https://blog.network-solution.net/tag/mpls-te/ 32 32 88039135 IS-IS TE https://blog.network-solution.net/is-is-te/?utm_source=rss&utm_medium=rss&utm_campaign=is-is-te https://blog.network-solution.net/is-is-te/#respond Wed, 12 Aug 2015 21:42:29 +0000 http://blog.network-solution.net/?p=229 IS-IS Traffic Engineering (TE) is an extension of IS-IS to support MPLS TE. As specified in RFC 5305 and RFC 4205, IS-IS TE defines new TLVsand sub-TLVs in IS-IS LSPs to carry TE information, floods LSPs to implement the flooding and synchronization of TE information, and transmits TE information to the CSPF module. IS-IS TE supports MPLS …

The post IS-IS TE appeared first on Network Solution.

]]> https://blog.network-solution.net/is-is-te/feed/ 0 229 Configuring an Integrated IP RAN (PWE3 + L3VPN) with Ethernet NodeBs https://blog.network-solution.net/configuring-an-integrated-ip-ran-pwe3-l3vpn-with-ethernet-nodebs/?utm_source=rss&utm_medium=rss&utm_campaign=configuring-an-integrated-ip-ran-pwe3-l3vpn-with-ethernet-nodebs https://blog.network-solution.net/configuring-an-integrated-ip-ran-pwe3-l3vpn-with-ethernet-nodebs/#respond Tue, 14 Apr 2015 21:13:52 +0000 http://blog.network-solution.net/?p=119 Networking Requirements The integrated L2VPN access to L3VPN solution allows Ethernet NodeBs to communicate with Radio Network Controllers (RNCs). It terminates the L2VPN and connects the L3VPN on a SR by creating a Virtual Ethernet group (VE-group). PW redundancy is configured to protect PWs on the L2VPN and VPN FRR is configured to protect links …

The post Configuring an Integrated IP RAN (PWE3 + L3VPN) with Ethernet NodeBs appeared first on Network Solution.

]]> https://blog.network-solution.net/configuring-an-integrated-ip-ran-pwe3-l3vpn-with-ethernet-nodebs/feed/ 0 119 MPLS Structure https://blog.network-solution.net/mpls-structure/?utm_source=rss&utm_medium=rss&utm_campaign=mpls-structure https://blog.network-solution.net/mpls-structure/#respond Thu, 09 Apr 2015 21:31:27 +0000 http://blog.network-solution.net/?p=110 l MPLS network forwards packet according to the label. But how does label be generated? What mechanism does MPLS adopt to implement data forwarding? l MPLS includes two plane: control plane and data plane. l Control plane’s charge is to generate and maintain routing information and label information. Data plane’s charge is conventional IP packet …

The post MPLS Structure appeared first on Network Solution.

]]> https://blog.network-solution.net/mpls-structure/feed/ 0 110 Introduction to MPLS TE https://blog.network-solution.net/introduction-to-mpls-te/?utm_source=rss&utm_medium=rss&utm_campaign=introduction-to-mpls-te https://blog.network-solution.net/introduction-to-mpls-te/#respond Thu, 02 Apr 2015 13:52:53 +0000 http://blog.network-solution.net/?p=94 Purpose In a traditional IP network, a node select the shortest path as the route regardless of other factors such as bandwidth. The shortest path, however, may be congested with traffic, whereas other available paths are idle. Figure 1 Problems in Traditional Routing As shown in Figure 1, assume that links have the same metric. …

The post Introduction to MPLS TE appeared first on Network Solution.

]]> https://blog.network-solution.net/introduction-to-mpls-te/feed/ 0 94