Download the topology from here IPv6 lab tasks: Enable IPv6 globally on each router Enable IPv6 under the interfaces Configure DHCPv6 server Check how to enable IPv6 on the switch from here Configure the routers as below: R1 – R2 Gi0/0 2001:AAAA:BBBB:CCCC::/64 eui-64 à Gi 0/0 2001:AAAA:BBBB:CCCC:1234:1234:1234:1234/64 R2—R3 Gi0/1 2001:BBBB:AAAA:AAAA:1111:1111:1111:1111/64 è Gi0/1 autoconfig R3 local …
Continue reading IPv6 lab for CCNA 200-301CCNA 200-301
Subnetting LAB: Download Cisco packet tracer here Download the topology from here We have IP address range 192.168.0.0 /24 Tasks: Divide the subnet to cover all the needs in the topology and use 192.168.1.0 /25 for the interconnections between the routers. Use last three IP addresses in each subnet for Router, switch and DHCP server …
Continue reading CCNA 200-301 IPv4 subnetting LAB