Networking Requirements As shown in Figure 1, two IPv6 networks are connected to Device B on the IPv4 backbone network through Device A and Device C. To interconnect the two IPv6 networks, configure a manual IPv6 over IPv4 tunnel between Device A and Device C. Figure 1 Configuring a manual IPv6 over IPv4 tunnel Precautions When configuring a manual IPv6 over IPv4 tunnel, note the following …
Continue reading Example for Configuring a Manual IPv6 over IPv4 TunnelMarch 2016
You are browsing the site archives for March 2016.
Networking Requirements As shown in Figure 1, Device A and Device B are connected through GE interfaces. To check the connectivity between the two interfaces, configure global unicast IPv6 addresses 2001:db8::1/32 and 2001:db8::2/32 for the GE interfaces. Figure 1 Configuring IPv6 addresses for interfaces Device Name Interface IP Address DeviceA GE0/1/0 2001:db8::1/32 DeviceB GE0/1/0 2001:db8::2/32 Precautions None Configuration Roadmap The configuration …
Continue reading Example for Configuring IPv6 Addresses for Interfaces